Top navigation bar Bottom navigation bar

Leisure courses

Access courses

Engineering (Aerospace, Electrical & Electronic or Mechanical) Advanced (Level 3)

This qualification has been developed with local employers to provide you with the skills, knowledge and understanding needed to gain confidence in engineering. In your first year you will study for an Engineering BTEC Level 3 90-credit Diploma, before specialising in mechanical, electrical/electronic, or aeronautical engineering in your second year.

Mark

Engineers are at the forefront of almost every aspect of modern society, designing, building and shaping the world around us and this is what I want to be a part of.

Bedford College has excellent engineering facilities including equipment used in industry and actual aircraft parts such as flight instruments and gas turbine engines, which aids our learning and understanding.  We even have an aircraft in College and activities include using the aircraft manual to fit a new landing wheel or taking out and inspecting the flaps and the landing gears. The aircraft is fully functional, which means that we get to run through the power on sequence, adjust the flaps and even retract the landing gear as if we were in flight.

Many of the tutors have industry experience from being in the RAF to flying their own aircraft, which means that lessons are taught to industry standard rather than just out of a book. Combined with the facilities available, the tutors are able to share their knowledge, experience and practical skills, which definitely helps us when we’re applying for jobs and Apprenticeships.

There’s no doubt that my time at College has been worthwhile and I have really enjoyed it.  My next steps are going to the University of Leeds to study Aeronautical & Aerospace Engineering.

Mark - Engineering (Aerospace) Level 3

Entry requirements

To begin this study programme you will need... 

Duration: 2 Years

  • 4 GCSEs at grades A*-C or 9-4 ideally including English, maths and science (maths must have been studied at the Higher tier rather than the Foundation tier) 
OR
  • Engineering Level 2 Diploma with Functional Skills


Course content

The 90-credit Diploma in Engineering is broadly equivalent to 1.5 A-Levels and is a mixture of theoretical and practical units.

  • Subject units:
    • Health and safety in the engineering workplace
    • Mathematics for engineering technicians
    • Mechanical principles and applications
    • Electrical and electronic principles
    • Properties and application of engineering materials
    • Electro, pneumatic and hydraulic systems and devices
    • Engineering drawing for technicians
    • Fabrication processes and technology
    • Principles and applications of electronic devices and circuits
    • Electronic measurement and testing
  • English and maths:
    If you don't already have GCSE English and maths grade A*-C, we will work with you to help you develop your maths and English skills. 
  • Work experience
  • Personal development skills, study skills and employability skills 
  • Additional vocational learning and qualifications: 
    • You will also develop your practical skills throughout the programme.

Assessment methods

Units will be assessed using written assignments and/or practical work.

Qualifications

Aeronautical or Electrical & Electronic or Mechanical Engineering BTEC Level 3 Extended Diploma

Plus:

  • Engineering BTEC Level 3 90-credit Diploma
  • English and maths skills
  • Work experience
  • Personal development skills
  • Study skills
  • Employability skills

You can also gain up to 168 UCAS points. 

Further study and career options

To progress on to the second year of study you will need to successfully complete all of the qualifications studies in the first year. On successful completion of the main qualification you will be awarded the Engineering Edexcel BTEC Level 3 90-credit Diploma. In the second year you can top up the 90-credit diploma to a specialist diploma, choosing an Engineering Edexcel BTEC Level 3 Extended Diploma with a mechanical bias or an electrical and electronic bias; or alternatively an Aeronautical Engineering Edexcel BTEC Level 3 Diploma. Successful completion of the second year will allow you to look for work in the engineering industry or progress to university. You can also progress on to degree-level study here at College with the Electrical & Electronic Engineering HNC or Mechanical Engineering HNC

Additional information

Towards the end of the first year you will be asked to choose one of three options for your second year of study:

  • Top-up to an Engineering Edexcel BTEC Level 3 Extended Diploma (Electrical & Electronic bias) while studying additional practical skills
  • Top-up to an Engineering Edexcel BTEC Level 3 Extended Diploma (Mechanical bias) while studying additional practical skills.
  • Complete an Aeronautical Engineering Edexcel BTEC Level 3 Diploma.

If you select either Option 1 or Option 2 you will study a further nine units. Five of these units will be common to both electrical and electronic engineering, and mechanical engineering; the other four units will be specialist units depending on your chosen area. Following successful completion of year one and two you will be awarded the Engineering Edexcel BTEC Level 3 Extended Diploma (which is equivalent to three A-Levels).

If you select Option 3 you will study 12 units, all with an aeronautical engineering focus. On successful completion you will be awarded the Aeronautical Engineering Edexcel BTEC Level 3 Diploma – this is broadly equivalent to two A-Levels. In addition you will have been awarded the Engineering 90-credit diploma, so you should complete the second year with the equivalent of 3.5 A-Levels.

If you are aged 16-18, tuition fees, exam fees and College membership are free. However, there are additional costs associated with some courses. To take part in this course there will be an additional fee of £30 towards any clothing needed for this course and £25 to attend trips that will complement your course.

Funding information

All full-time Level 1 and Level 2 courses are now FREE for everyone, whatever their age. If you are looking to study a Level 3 qualification, courses are still free if you’re under 19 or 19-23 and studying your first full Level 3 qualification. If you’re over 23 or studying a second Level 3 qualification, you will need to pay a fee. Find out more on our financial support page at www.bedford.ac.uk/finance

If you are aged 19 or over you may qualify for an Advanced Learner Loan to help you pay the tuition fees for this course. Find out more at www.bedford.ac.uk/loans. You can also pay by instalments to help make the cost of this course more affordable.

Course information & how to book

To apply online, select the 'Apply' button below. You will need to register an account and then you can follow the instructions on screen.

LengthStart DateFees per yearLocationCourse Code
2 years 11/09/2017 Launch our fee calculatorFree if 16-18yrs. Are you 19+?
Launch our fee calculator
Cauldwell Street D1426

Apply Online

Part-time course already started?

Our upcoming 2017-18 Part-time Course Guide will be out in May.
You can request a copy via the form below...

Additional Learning Support
If you have a specific learning difficulty or disability, problems with English and Maths, are deaf or hearing impaired, or missing the essential skills needed to complete your course, our Additional Learning Support team are on hand to give you assistance whenever you need it.  Find out more.

Autism & Asperger’s Syndrome Support
At Bedford College, we are committed to developing the provision for students on the autistic spectrum, including Asperger’s Syndrome.  Find out more.

Accessibility
We have access arrangements in place to help students with disabilities or any other particular needs. Call us on 01234 291000 for more information.

Additional formats
Course information sheets are also available in large print and audio formats. Call us on
01234 291000 to order your copy.
YouTube Instagram LinkedIn Moodle Higher Education Moodle Have Your Say